Forklift industrial handling vehicles, refers to a variety of pieces of pallet handling wheeled vehicle loading and unloading, stacking and short-distance transport operations. International Organization for Standardization ISO / TC110 called industrial vehicles. Commonly used in warehousing and transport large objects, usually fuel or battery-powered machines. Technical specifications of the forklift is used to indicate the structural features and performance of the truck. The main technical parameters are: nominal weight, load center distance, maximum lifting height, mast tilt, maximum speed, minimum turning radius, minimum ground clearance and wheelbase, track width and so on. 1. Lifting capacity: forklift nominal weight refers to the distance between the center of gravity of goods to the anterior wall of the fork is not greater than the load center distance truck leasing, the maximum allowable cargo weight lifting to t (t), respectively. When the center of gravity of the cargo on the forks beyond the prescribed distance when the load center, due to the longitudinal stability of the truck, from the weight should be reduced accordingly. 2. Load center: Load center refers to the standard forks placed on cargo electric forklift, its center of gravity vertical cross section of the front wall of the arrival of the horizontal distance T, in mm (millimeters). For 1T to 4T forklift load center distance specified for 500mm. 3, the maximum lifting height: maximum lifting height is when on a flat solid ground, forklift truck loaded with goods rose to the highest position of electric tractor, fork on the surface of the horizontal section of the truck from the ground level where the vertical distance . 4, the mast inclination: the mast tilt angle refers to no load in the truck on a flat solid surface, the vertical position of the mast relative to its maximum inclination angle forward or backward. Anteversion's role is to facilitate the fork to take place and unloading cargo; after dip role is when the forklift with freight line to prevent the cargo from slipping off the forks. Usually before the truck angle is 3 ° ~ 6 °, the rearward tilt angle of 10 ° ~ 12 °. Electric forklift tractor _ _ Custer Custer provided by Shenzhen Logistics Equipment Co. Shenzhen Custer Logistics Equipment Co. (www.szcaster.com) strong, credible, in Shenzhen, Guangdong electronics, electrical products and other manufacturing equipment industry has accumulated a large number of loyal customers. The company better work attitude and continuous improvement and innovative ideas will lead you hand into the brilliant Custer, a better future!